Motorcycle and ATV tire sizes explained
How to read 120/70ZR17, 180/55B18, MT90-16, 3.00-18 and 25x8-12 tire markings, plus load, speed and date codes.

Tire sizes look cryptic, but each part of the code means something specific. Always match the size, construction and ratings listed by the manufacturer for your exact model year.
Metric sizes: 120/70ZR17
- 120 is the section width in millimetres.
- 70 is the aspect ratio: sidewall height as a percentage of width.
- R means radial construction. B (as in 180/55B18) means bias-belted, and a dash means bias-ply.
- 17 is the rim diameter in inches.
- A Z before the R marks a tire rated for speeds above 240 km/h (149 mph).
Load index and speed rating: 58W
After the size you will usually see a number and a letter. The number is a load index, a code for the maximum load each tire can carry, looked up in a standard table. The letter is the speed rating: for example, H is 210 km/h (130 mph), V is 240 km/h (149 mph) and W is 270 km/h (168 mph).
Older and alpha sizes: MT90-16 and 3.00-18
Some cruisers use alphanumeric sizes such as MT90-16, where the letters encode width and the last number is the rim diameter. Older bikes and many dirt bikes use inch sizes such as 3.00-18: a nominal 3-inch section width on an 18-inch rim.
ATV and UTV sizes: 25x8-12
ATV and UTV tires usually give overall height, width and rim diameter in inches: 25x8-12 is about 25 inches tall and 8 inches wide on a 12-inch wheel.
Other markings
- M/C marks a motorcycle tire; TL and TT mean tubeless and tube-type.
- The last four digits of the DOT code are the manufacture date: 2324 means week 23 of 2024.